Part Number Hot Search : 
004A11L T89C51 TL494I FBR3030 MA4100 LBN12014 P50N06 SMB43CA
Product Description
Full Text Search
 

To Download MN102H60G Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 MN102H60G , MN102H60K
Type ROM (x 8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Interrupts
MN102H60G 128 K 4K LQFP100-P-1414 *Lead-free , MLGA100-L-1010 *Lead-free With main clock operated MN102H60K 256 K 8K LQFP100-P-1414 *Lead-free
58 ns (at 3.0 V to 3.6 V, 34 MHz)
* RST pin * Watchdog * NMI pin * Timer counter 0 to 7 underflow * Timer counter 8 to 12 underflow * Timer counter 8 to 12 compare capture A * Timer counter 8 to 12 compare capture B * ATC ch.0 to 3 transfer finish * ETC ch.0 to 1 transfer finish * External 0 to 4 * Serial ch.0 to 4 transmission * Serial ch.0 to 4 reception * KI pin (OR) * A/D conversion finish Timer counter 0 : 8-bit x 1 (prescaler, timer output, event count, clock supply for 16-bit timer, timer interrupts) Clock source ********************* 1/2 of system clock (BOSC) frequency; 1/4 of system clock (XI) frequency; system clock (BOSC); TM0IO pin Interrupt source **************** underflow of timer counter 0 Timer counter 1 : 8-bit x 1 (serial clock generator, timer interrupts) Clock source ********************* 1/2 of system clock (BOSC) frequency; underflow of timer counter 0, 4 Interrupt source **************** underflow of timer counter 1 Timer counter 2 : 8-bit x 1 (serial clock generator, timer interrupts) Clock source ********************* 1/2 of system clock (BOSC) frequency; underflow of timer counter 0, 4 Interrupt source **************** underflow of timer counter 2 Timer counter 3 : 8-bit x 1 (A/D conversion start up, timer interrupts) Clock source ********************* 1/2 of system clock (BOSC) frequency; underflow of timer counter 0, 4 Interrupt source **************** underflow of timer counter 3 Timer counter 4 : 8-bit x 1 (prescaler, serial clock generator, timer output, event count, clock supply for 16-bit timer, timer interrupts) Clock source ********************* 1/2 of system clock (BOSC) frequency; underflow of timer counter 0; TM4IO pin Interrupt source **************** underflow of timer counter 4 Timer counter 5 : 8-bit x 1 (serial clock generator, timer interrupts) Clock source ********************* 1/2 of system clock (BOSC) frequency; underflow of timer counter 0; system clock (BOSC) Interrupt source **************** underflow of timer counter 5 Timer counter 6 : 8-bit x 1 (timer interrupts) Clock source ********************* 1/4 of system clock (XI) frequency; underflow of timer counter 0, 4 Interrupt source **************** underflow of timer counter 6 Timer counter 7 : 8-bit x 1 (timer output, event count, timer interrupts) Clock source ********************* 1/4 of system clock (XI) frequency; underflow of timer counter 0; TM7IO pin Interrupt source **************** underflow of timer counter 7 Connectable timer counter 0 to 7
Timer Counter
Timer counter 8 : 16-bit x 1 (timer output, event count, input capture, PWM output, 2-phase encoder input) Clock source ********************* underflow of timer counter 0, 4; TM8IOB pin; 1/2 of system clock (BOSC) frequency; 2-phase encode of TM8IOA pin/TM8IOB pin (1 x, 4 x); TM8IC pin Interrupt source **************** underflow of timer counter 8; timer counter 8 compare capture A; timer counter 8 compare capture B
MAE00005EEM
MN102H60G , MN102H60K
Timer Counter (Continue)
Timer counter 9 : 16-bit x 1 (timer output, event count, input capture, PWM output, 2-phase encoder input) Clock source ********************* underflow of timer counter 0, 4; TM9IOB pin; 1/2 of system clock (BOSC) frequency; 2-phase encode of TM9IOA pin/TM9IOB pin (1 x, 4 x) Interrupt source **************** underflow of timer counter 9; timer counter 9 compare capture A; timer counter 9 compare capture B Timer counter 10 : 16-bit x 1 (timer output, event count, input capture, PWM output, 2-phase encoder input) Clock source ********************* underflow of timer counter 0, 4; TM10IOB pin; 1/2 of system clock (BOSC) frequency; 2-phase encode of TM10IOA pin/TM10IOB pin (1 x, 4 x) Interrupt source **************** underflow of timer counter 10; timer counter 10 compare capture A; timer counter 10 compare capture B Timer counter 11 : 16-bit x 1 (timer output, event count, input capture, PWM output, 2-phase encoder input) Clock source ********************* underflow of timer counter 0, 4; TM11IOB pin; 1/2 of system clock (BOSC) frequency; 2-phase encode of TM11IOA pin/TM11IOB pin (1 x, 4 x) Interrupt source **************** underflow of timer counter 11; timer counter 11 compare capture A; timer counter 11 compare capture B Timer counter 12 : 16-bit x 1 (timer output, event count, input capture, PWM output, 2-phase encoder input) Clock source ********************* underflow of timer counter 0, 4; 1/2 of system clock (BOSC) frequency; 2-phase encode of TM12IOA pin/TM12IOB pin (1 x, 4 x), TM12IOB pin Interrupt source **************** underflow of timer counter 12; timer counter 12 compare capture A; timer counter 12 compare capture B Timer counter 13, 14 : 8-bit x 1 (simple PWM output) Clock source ********************* 1/2 of system clock (BOSC) frequency; underflow of timer counter 0 Timer counter 15 : 16-bit x 1 (pulse width measurement) Clock source ********************* system clock (BOSC); 1/2 of system clock (BOSC) frequency; underflow of timer counter 0; TM15IB pin Connectable timer counter 13, 14
Serial Interface
Serial 0, 1 : 8-bit x 1 (transfer direction of MSB / LSB selectable, transmission / reception of 7, 8-bit length) Clock source ********************* 1/8 of timer counter 1 underflow frequency; 1/8, 1/2 of timer counter 2 underflow frequency; external pin Serial 2, 3 : 8-bit x 1 (transfer direction of MSB / LSB selectable, transmission / reception of 7, 8-bit length) Clock source ********************* 1/8 of timer counter 4 underflow frequency; 1/8, 1/2 of timer counter 5 underflow frequency; external pin Serial 4 : 8-bit x 1 (transfer direction of MSB / LSB selectable, transmission / reception of 7, 8-bit length) Clock source ********************* 1/8 of timer counter 1 underflow frequency; 1/8, 1/2 of timer counter 5 underflow frequency; external pin UART x 2 (common use with serial 3, 4) I2C x 2 (common use with serial 3,4; single master)
I/O Pins A/D Inputs PWM ICR OCR Notes
I/O
82
* Common use : 46 (address data separate 8-bit mode) * Common use : 53 (address data multiplex 8-bit mode)
10-bit x 8-ch. (with S/H) 16-bit x 5-ch. (timer counter 8 to 12) 16-bit x 5-ch. (timer counter 8 to 12) 16-bit x 5-ch. (timer counter 8 to 12) Address / data multiplex bus interface, address / data separate bus interface, 8-bit / 16-bit bus width selectable
See the next page for electrical characteristics, pin assignment and support tool.
MAE00005EEM
Electrical Characteristics
Supply current
Limit Parameter Symbol Condition min VI = VDD or VSS, output open Operating supply current IDDopr f = 34 MHz , VDD = 3.3 V Pin with pull-up resistor is open Supply current at STOP IDDS All other input pins and Hi-Z state input/output pins are simultaneously applied VDD or VSS level Supply current at HALT IDDH f = 34 MHz , VDD = 3.3 V, output open (Ta = -40C to +85C , VDD = AVDD = 3.3 V , VSS = AVSS = 0 V) * "" depends on products. MN102H60G, MN102H60K : = 0 MN102HF60G : = 1 MN102HF60K : = 2 30+10 * mA 70 A 60+10 * mA typ max Unit
A/D characteristics
Limit Parameter Non-linear error A/D conversion time Analog input voltage VIA Symbol Condition min 10-bit at 34 MHz 3.29 VSS VDD typ max 4 LSB s V Unit
(Ta = 25C , VDD = AVDD = 3.3 V , VSS = AVSS = 0 V)
MAE00005EEM
MN102H60G ,MN102H60K
Pin Assignment
P91,TM10IOA,BIBT2,DMAACK1 P90,TM8IOA,BIBT1,DMAREQ1 P85,TM9IOA,SBT4,SCL4,SBO2
53
P92,TM10IOB,DMAREQ0
P93,TM10IC,DMAACK0
P84,TM7IO,SBO3,SDA3
52
P87,TM9IC,SBO4,SDA4
P71,SBI0,LCAS,CAS
P86,TM9IOB,SBI4
P73,SBT1,DMUX
P72,SBO0,UCAS
100 98 96 94 92 90 88 86 84 82 80 78 76 99 97 95 93 91 89 87 85 83 81 79 77 75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
48
PA2,IRQ2 PA3,IRQ3 PA4,IRQ4,TM15IB (ADSEP) RST VDD D0 D1 D2 D3 D4 D5 D6 D7 VSS D8 D9 D10 D11 D12 D13 D14 D15
49
PA1,IRQ1
50
PA0,IRQ0
51
P83,TM4IO,SBI3
P70,SBT0,RAS
P75,SBO1
P74,SBI1
P97,AN3
P96,AN2
P95,AN1
P94,AN0
VREF+
AVSS
NMI
VDD
*
*
P82,TM0IO,SBT3,SCL3,SBI2 P81,TM140B P80,TM140A A23,P47,AN7,WDOUT A22,P46,AN6,STOP A21,P45,AN5 A20,P44,AN4 VREFA19,P43 A18,P42 A17,P41 A16,P40 A15,P37,KI7 A14,P36,KI6 A13,P35,KI5 A12,P34,KI4 AVDD A11,P33,KI3 A10,P32,KI2 A9,P31,KI1 A8,P30,KI0 A7,P27 A6,P26 A5,P25 A4,P24,TM15IA
MN102H60G MN102H60K
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
BOSC,PB0,BIBT1,BIBT2
P56,BSTRE,TM15IA
P60,WAIT,SBT2
P50,CS0,TM13OA
P51,CS1,TM13OB
P52,CS2,TM14OA
P53,CS3,TM14OB
A0,P20,SBT2
A1,P21,SBI2
WE,WEH,P63
A2,P22,SBO2
P55,BRACK
P54,BREQ
WEL,P62
RE,P61
(WORD)
A3,P23
XI,PB1
LQFP100-P-1414 * Use 33 k to 50 k.
*Lead-free
* Pin position in 16-bit bus width address data split memory extension mode.
Support Tool
In-circuit Emulator Flash Memory Built-in Type
PX-ICE102H60-LQFP100-P-1414 Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Package MN102HF60G, MN102HF60K 128 K / 256 K 4 K / 10 K 58 ns (at 3.0 V to 3.6 V, 34 MHz) LQFP100-P-1414 *Lead-free
MAE00005EEM
(MODE)
OSCI
OSCO
VDD
XO
VDD
VSS
25
1
2
3
4
5
6
7
8
9
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2003 SEP


▲Up To Search▲   

 
Price & Availability of MN102H60G

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X